Rejet

[dan]

hi iv put a new hmf slip on on and need to rejet i got a jet from the dealer do i just put that in i read somewere that you need to adjust the 1/4-1/2 throttle and the 1/2-3/4 throttle and the 3/4-wide open seperatly the main jet only does 3/4 to wide open plz help ASAP

[Sprocket]

Ok maybe up one size main /raise the needle a notch or 2 and read the plug
Open mixture screw depending on carb . -If your going with a dynojet then follow the instructions on the info paper ,if you don,t ride wide open a lot maybe your fine as is ,luck Ron